from the blog..Where the heart is

DIY Burlap Wreath and a tutorial

It's VERY simple- that's why I was capable of making one, so here's how it's done:

1. Get a wire hanger and shape into a circle. If your hanger you find is anything like mine was, this is easier said than done.

2. Cut 4-6 inch strips. I started with 6" but decided I liked the 4" better. I used about 5 strips that were about 3 feet long.

3. Poke hanger through burlap in about 3"folds and scrunch down.

4. Keep poking and scrunching, poking and scrunching... and poking and scrunching. Then just when you think you might be done you most likely need to poke and scrunch just a little more! I then hung with my favorite Ballard Designs check ribbon.